2000 CAT 428C 4WD BACKHOE , 4 IN 1 BUCKET WITH ROLL OVER FORKS , RIDE CONTROL, SHUTTLE SHIFT WITH 5700 HOURS , ROPS A/C CAB , SIDE SHIFT , EXT HOE, HITCH AND THREE BUCKETS , GOOD EX COUNCIL MACHINE
Visual Appraisal
|
|
All % are life remaining
|
| DESCRIPTION |
COMMENT |
DESCRIPTION |
COMMENT |
| Left side
visual/Paint: |
OK |
Front bucket
type/
condition: |
4-IN-1
2 PIECE BOE/GOOD +ROF |
| Loader frame
visual: |
OK - REPAIRED RHS
LOADER FRAME |
Leaks: |
NO |
| Level/Straight: |
YES |
|
|
Engine canopy/
covers cond: |
OK |
Radiator/Cooler
cond: |
CLEAN GOOD |
| Hyd oil
level/Colour: |
OK, CLEAN |
Oil
level/Colour: |
OK, LIGHT BLACK |
| Engine visual
leaks: |
NO |
Engine type (cly/turbo): |
TURBO |
| Engine (cyl) No: |
4 |
|
|
| Batteries/Voltage: |
12V OK |
|
|
| F/tyre size: |
340/80R18 |
F/tyre (%): |
0 |
| R/tyre size: |
16.9-28(GRASS) |
R/tyre (%): |
50 |
| |
|
Side Shift: |
YES MANUAL |
| Hyd clamp: |
YES |
Stabiliser legs
cond: |
OK, NEEDS NEW WEAR
PADS |
| Pivot post
visual: |
OK |
Extenda hoe
visual: |
OK |
| Hammer
piping/Used: |
YES - NOT USED |
Quick hitch
type/cond: |
MANUAL MILLER |
| Bucket size
(mm): |
600 |
Bucket cond (%): |
70 |
| Other buckets: |
300, 450 |
Travel Lock
Working: |
YES |
| Cab door/Strut: |
OK BOTH SIDES |
All glass OK: |
OK NO BREAKS |
| Mats/Lining: |
OK |
Seat work/belt: |
YES, HAS SEATBELT |
| Hours Showing: |
5680 |
Believe
it/approx: |
YES |
| Dash Gauges
okay: |
OK |
Rops cert?: |
YES |
| Beacon: |
YES HARDWIRED |
Air cond/working: |
YES, EXCELLENT |
| |
|
|
|
|
Operating Appraisal
|
|
All % are life remaining
|
| DESCRIPTION |
COMMENT |
DESCRIPTION |
COMMENT |
| Start OK: |
YES, BATTERY OR STARTER GETTING SAD |
Smoke: |
YES ON ACCELARATION |
| Oil pressure: |
OK |
Buzzers/alarms
work: |
YES |
| Blow back: |
SLIGHT |
Radiator
bubbling: |
NO |
| Motor noises: |
NONE
EVIDENT |
Transmission
Type: |
HYD SHUTTLE, SYNCHRO SHIFT |
| Forward all
gears/No: |
YES
4 |
Reverse/No: |
YES 4 |
| Buzzer/rev: |
YES |
4wd engage: |
YES |
| Brakes work (%): |
70 |
Hand brake: |
YES |
| Steering feel: |
BIT OF FEEDBACK TRHOUGH THE STEERING WHEEL |
Hyd/Transmission
noises: |
NO |
| Bucket
pins/Front (%): |
70 |
Loader frame
pins
(%): |
70 |
| Stabiliser Rams: |
WORKING NO DAMAGE |
Pivot post pins
(%): |
70 |
| Boom pins (%): |
60 |
Dipper pins (%): |
80 |
| Ext/Play: |
NO |
Bucket pins/Back
(%): |
60 |
| General Hoe
Operation (/10): |
7 |
General Hoe
Operation (notes): |
GOOD FUNCTIONALITY, STABILISERS HAVE EXCESS MOVEMENT (NEED ADJUSTING |
| How did the Hyd
Perform (/10): |
8 |
How did the Hyd
perform (notes): |
PLENTY OF SPEED AND POWER, LEAK |
| What are your
overall thoughts (/10): |
7 |
What are your
overall thoughts (notes): |
REASONSABLY TIDY MACHINE EXCEPT FOR THE REPAIR TO THE LOADER FRAME |
| Books: |
YES |
Service history: |
COUNCIL MACHINE |
| Special
attachments: |
HAMMER PIPING, 2 EXTRA BUCKETS, ROLLOVER FORKS |
Special
comments: |
2000 CAT 428C 4WD BACKHOE , 4 IN 1 BUCKET WITH ROLL OVER FORKS , RIDE CONTROL, SHUTTLE SHIFT WITH 5700 HOURS , ROPS A/C CAB , SIDE SHIFT , EXT HOE, HITCH AND THREE BUCKETS , GOOD EX COUNCIL MACHINE |
| |
|
| |
|
| |
Sell Price incl
GST($): |
52,250.00 |
| |
|
Sell Price
before GST($): |
47,500.00 |
| |
|
|
|
THE ABOVE EQUIPMENT IS SOLD IN 'AS IS WHERE
IS' CONDITION BASED ON THE PURCHASERS INSPECTION AND
IS NOT WARRANTED BY THE VENDOR AS TO ITS FITNESS FOR
ANY PARTICULAR PURPOSE EITHER EXPRESSED OR IMPLIED.
APPRAISALS ARE OFFERED AS A GUIDE TO UNIT CONDITION
ONLY AND DO NOT CONSTITUTE ANY GUARANTEE,
REPRESENTATION OR CONTRACTUAL LIABILITY BY CONAG
EQUIPMENT AS TO ACCURACY OF COMMENT OR NOTATION.
UNITS AVAILABLE SUBJECT TO PRIOR SALE, HOUR METER
READING MAY VARY, PRICE SUBJECT TO CHANGE WITHOUT
NOTICE. INFORMATION REGARDING USED EQUIPMENT HAS
BEEN SUPPLIED BY A THIRD PARTY AND WHILE DEEMED
RELIABLE, IS NOT GUARANTEED, INTERESTED PARTIES MUST
MAKE THEIR OWN DETERMINATIONS AND SATISFY THEMSELVES
IN ALL RESPECTS AS TO THE ACCURACY OF INFORMATION
CONTAINED HEREIN.
|
