JCB 8030Z EXCAVATOR

2007 JCB 8030Z 3T EXCAVATOR 2034 HRS 300 450 600 AND 900 TILT BUCKET NEW TRACKS SPROCKETS , WITH HAMMER

Serial Number:
Registration:
Engine Make:
Hours:
Year:

Dealer:

Telephone:
Fax:
Email:

JCB08030C71229179
n/a
JCB
2034
2007

CONAG EQUIPMENT

07 4972 5203
07 4972 2460
sales@conag.com.au
     

Visual Appraisal

All % are life remaining
DESCRIPTION COMMENTS  DESCRIPTION  COMMENTS 
Left side visual/Paint: GOOD Radiator/Cooler visual: GOOD
Right Side visual/Paint: GOOD Hyd pump visual: GOOD DRY
Air cleaner cond: GOOD Counter weight cond: GOOD
Stick/boom align: GOOD Track gear align: STRAIGHT
Short/Long dipper: STD Bucket Type (mm): 900MM TILT RIM
Quick hitch type/cond: JCB MANUAL Bucket cond/Teeth (%): 30
Visual Boom/Stick: GOOD Visual tip link
hyd rams:		 GOOD
Hammer Pipe: YES Reverse flow: YES
Other Buckets: 300,450,600 Knuckle boom: NO
Batteries/Voltage: 12V Oil Slew reduc/Visual: GOOD
Boom grease point: GOOD Top cab visual/
beacon:		 X1
Engine cover: GOOD Engine Type (Cyl/Turbo): PERKINS
Oil Level/Colour: BLACK Engine Service No: HL51367U555736P
  Engine (cyl) No: 3
Hyd oil level/colour: NEW Engine visual: CLEAN
Glass/mats: OK Cab visual: GOOD
Vandal guards: NA Seat work/belt:: YES OK
Hand rails/steps: GOOD Control Type: SERVO
Believe it/approx: YES Hours Showing: 2034
Computer work: YES Dash Gauges okay: YES
Air cond/Work: NA Rops/Cert?: YES
       

Operating Appraisal

All % are life remaining
DESCRIPTION COMMENTS DESCRIPTION COMMENTS
Start OK: YES Smoke: NO
Oil pressure: IN SPEC Buzzers/alarms work: YES
Blow back: NO Radiator bubbling: NO
Motor noises: NO Hyd feel/Noises: GOOD
Slew ring wear (%): 80 Slew brake: YES OK
Bucket pins (%): 80 Stick pins (%): 80
Boom pins (%): 80 Operation overall: GOOD
Rubber/steel tracks: RUBBER Swiwel Joint Hoses (under): GOOD
Track guides
(No/Cond):		 0 Grouser height/cond: NA
Grouser Height (mm): NEW Grouser Width(mm): 300
Track chain wear
(%):		 100    
    Pins turned: YES
Rollers (%): 70 Any leaking: NO
Both sides the same: YES Sprockets (%): 100
Estimate hours left: 3000 Both sides the same: YES
Idlers: 100 Estimate hours left: 3000
Both sides the same: Yes Track adjusters: 90
Estimate hours left: 2500 Both sides the same: YES
Internal pin/bush wear (%): 0 Tram forward: YES 2 SPEED
Tram back: YES 2 SPEED Track straight: YES
Turning: GOOD Eng under load: GOOD
Front blade: YES Books: NO
Service history: YES    
Special comments: 2007 JCB 8030Z 3T EXCAVATOR 2034 HRS 300 450 600 AND 900 TILT BUCKET NEW TRACKS SPROCKETS , WITH HAMMER
   
   
  Sell Price incl GST: $ 54,450.00
  Sell Price before GST: $ 49,500.00

THE ABOVE EQUIPMENT IS SOLD IN 'AS IS WHERE IS' CONDITION BASED ON THE PURCHASERS INSPECTION AND IS NOT WARRANTED BY THE VENDOR AS TO ITS FITNESS FOR ANY PARTICULAR PURPOSE EITHER EXPRESSED OR IMPLIED. APPRAISALS ARE OFFERED AS A GUIDE TO UNIT CONDITION ONLY AND DO NOT CONSTITUTE ANY GUARANTEE, REPRESENTATION OR CONTRACTUAL LIABILITY BY CONAG EQUIPMENT AS TO ACCURACY OF COMMENT OR NOTATION. UNITS AVAILABLE SUBJECT TO PRIOR SALE, HOUR METER READING MAY VARY, PRICE SUBJECT TO CHANGE WITHOUT NOTICE. INFORMATION REGARDING USED EQUIPMENT HAS BEEN SUPPLIED BY A THIRD PARTY AND WHILE DEEMED RELIABLE, IS NOT GUARANTEED, INTERESTED PARTIES MUST MAKE THEIR OWN DETERMINATIONS AND SATISFY THEMSELVES IN ALL RESPECTS AS TO THE ACCURACY OF INFORMATION CONTAINED HEREIN.