JCB 8060 EXCAVATOR

2003 JCB 8060, 6T EXCAVATOR WITH RUBBER TRACKS - UNDERCARRAGE IN GOOD CONDITION - NEW HITCH WITH 600MM BUCKET AND BLADE, 5000 HOURS IN VERY GOOD CONDITION WITH FULL SERVICE HISTORY

Serial Number:
Registration:
Engine Make:
Hours:
Year:

Dealer:

Telephone:
Fax:
Email:

0884061
n/a
JCB
5400
2003

CONAG EQUIPMENT

07 4972 5203
07 4972 2460
sales@conag.com.au
     

Visual Appraisal

All % are life remaining
DESCRIPTION COMMENTS  DESCRIPTION  COMMENTS 
Left side visual/Paint: GOOD, SCRATCHES Radiator/Cooler visual: GOOD CLEAN
Right Side visual/Paint: GOOD, SCRATCHES Hyd pump visual: GOOD RESEALED 08/2010 BY JCB
Air cleaner cond: GOOD Counter weight cond: GOOD SCRATCHES
Stick/boom align: GOOD - STRAIGHT Track gear align: GOOD
Short/Long dipper: STD Bucket Type (mm): 600MM
Quick hitch type/cond: NEW JCB QUICK HITCH Bucket cond/Teeth (%): 30
Visual Boom/Stick: GOOD Visual tip link
hyd rams:		 NEW TIP LINK AND PINS 03/2010 BY JCB
Hammer Pipe: YES Reverse flow: YES
Other Buckets: NONE Knuckle boom: GOOD SLIGHT PLAY
Batteries/Voltage: 12V Oil Slew reduc/Visual: GOOD CLEAN
Boom grease point: GOOD Top cab visual/
beacon:		 GOOD
Engine cover: GOOD Engine Type (Cyl/Turbo): ISUZU 4 CYL
Oil Level/Colour: FULL CLEAR - SERVICED AND CHANGED BY JCB Engine Service No: 4JG1234666
  Engine (cyl) No: 4
Hyd oil level/colour: NEW Engine visual: GOOD, SERVICED BY JCB
Glass/mats: GOOD Cab visual: GOOD - ARM REST CRACKED
Vandal guards: NO Seat work/belt:: YES
Hand rails/steps: GOOD Control Type: SERVO
Believe it/approx: YES Hours Showing: 5400
Computer work: YES Dash Gauges okay: YES
Air cond/Work: NA Rops/Cert?: YES
       

Operating Appraisal

All % are life remaining
DESCRIPTION COMMENTS DESCRIPTION COMMENTS
Start OK: YES Smoke: NO
Oil pressure: GOOD Buzzers/alarms work: YES
Blow back: NO Radiator bubbling: NO
Motor noises: NONE Hyd feel/Noises: VERY GOOD
Slew ring wear (%): 70 Slew brake: GOOD
Bucket pins (%): 50 Stick pins (%): 50
Boom pins (%): 50 Operation overall: VERY GOOD FOR HOURS - SERVICED ON REGULAR BASIS BY JCB
Rubber/steel tracks: RUBBER - REPLACED AT 3000HRS 10/2008 Swiwel Joint Hoses (under): GOOD
Track guides
(No/Cond):		 2 VERY GOOD Grouser height/cond: VERY GOOD
Grouser Height (mm): 20 Grouser Width(mm): 400
Track chain wear
(%):		 50 SUSPECT LINK REMOVAL NO
PINS BUSHES(%): 50 Pins turned: NO
Rollers (%): 50 Any leaking: NO
Both sides the same: YES Sprockets (%): 50
Estimate hours left: 2000 Both sides the same: YES
Idlers: 50 Estimate hours left: 2000
Both sides the same: Yes Track adjusters: 50
Estimate hours left: 2000 Both sides the same: YES
Internal pin/bush wear (%): 50 Tram forward: GOOD
Tram back: GOOD Track straight: YES
Turning: GOOD Eng under load: GOOD
Front blade: VERY GOOD, NO MAJOR MARKS OR ANY DENTS Books: YES
Service history: FULL SERVICE HISTORY WITH JCB    
Special comments: 2003 JCB 8060, 6T EXCAVATOR WITH RUBBER TRACKS - UNDERCARRAGE IN GOOD CONDITION - NEW HITCH WITH 600MM BUCKET AND BLADE, 5000 HOURS IN VERY GOOD CONDITION WITH FULL SERVICE HISTORY FROM JCB
   
   
  Sell Price incl GST: $ 44,000.00
  Sell Price before GST: $ 40,000.00

THE ABOVE EQUIPMENT IS SOLD IN 'AS IS WHERE IS' CONDITION BASED ON THE PURCHASERS INSPECTION AND IS NOT WARRANTED BY THE VENDOR AS TO ITS FITNESS FOR ANY PARTICULAR PURPOSE EITHER EXPRESSED OR IMPLIED. APPRAISALS ARE OFFERED AS A GUIDE TO UNIT CONDITION ONLY AND DO NOT CONSTITUTE ANY GUARANTEE, REPRESENTATION OR CONTRACTUAL LIABILITY BY CONAG EQUIPMENT AS TO ACCURACY OF COMMENT OR NOTATION. UNITS AVAILABLE SUBJECT TO PRIOR SALE, HOUR METER READING MAY VARY, PRICE SUBJECT TO CHANGE WITHOUT NOTICE. INFORMATION REGARDING USED EQUIPMENT HAS BEEN SUPPLIED BY A THIRD PARTY AND WHILE DEEMED RELIABLE, IS NOT GUARANTEED, INTERESTED PARTIES MUST MAKE THEIR OWN DETERMINATIONS AND SATISFY THEMSELVES IN ALL RESPECTS AS TO THE ACCURACY OF INFORMATION CONTAINED HEREIN.